Sewa GPS RTK GeoFennel FGS1

Features
High speed processing
Support for both post-processing and kinematic
Processing ability separate or to be combined with GPS, GLONASS and BeiDou
Supports downloads & use of precise ephemeris
Generation of various reports
User friendly
Supplied with
GPS SYSTEM FGS 1 COMPLETE SET
ART.-NO. 751000
2 GNSS Antenna FGS 1
1 MicroSurvey Fieldgenius Software
1 Fieldcontroller DC5
1 Postprocessing Software
2 USB-Cable for FGS 1
2 RS-232 Cable for FGS 1
1 Measuring Tape 3 m
1 Tribrach AJ 10 black
1 Tribrach Adaptor AL 11-D black with optical plummet
1 Container
1 Operators manual

Technical data
Signal Tracking
256 channels with simultaneously tracked satellite signals:
- GPS L1 C/A, L1/L2P, L5
- GLONASS L1/L2
- BeiDou B1, B2, B3
- Galileo Yes, but not activated
- SBAS WAAS, EGNOS, MSAS

Performance Specifications
Cold start 50s
Warm start 30s
Initialization time typically 10s
Initialization reliability typically 99,9%
Signal reacquisition 2s

Positioning Specifications
Post processing static
- horizontal 2,5 mm + 0,5 ppm RMS
- vertical 5,0 mm + 0,5 ppm RMS
Real time kinematic
- horizontal 10 mm + 0,5 ppm RMS
- vertical 20 mm + 0,5 ppm RMS
E-RTK ( 100 km)
- horizontal 0,20 m + 1 ppm RMS
- vertical 0,40 m + 1 ppm RMS
Code differential GNSS positioning
- horizontal 0,25 m + 1 ppm RMS
- vertical 0,50 m + 1 ppm RMS
SBAS typically 1 m 3D RMS
Stand-Alone 1 ,5 m RMS

Communication
1 Serial port (7 Pin Lemo), Baud rates up to 921 600 bps
Radio modem (optional) Tx/Rx with full frequency rang from 410 470 MHz
- transmit power 0.5 2W adjustable
Positioning update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz
5 LED Indicating lights Power, satellite